An Easy to Use Ceiling Isolation Upgrade
for Suspended Ceiling Systems
The
IsoTile Ceiling Panel is designed to isolate and absorb ceiling
transmitted noise in both directions. Just drop in place on top
of your existing acoustic ceiling tiles. ASC’s IsoTile is
engineered to block and absorb sound. The Panels are delivered as
2’ x 2’ tiles that are 4.25" thick. They are also
available to fit metric sizes if required. Your installers can cut
as needed to fit odd sizes or mechanical openings for sprinklers,
vents or lights. Ceilings conditioned with IsoTiles look the same
as ordinary ceilings, but sound much better.
A
Floating Sound Barrier The Panels are constructed using two layers of fire rated
2” acoustic fiberglass sandwiched between a single 1/4”
sheet of drywall. Each is completely covered with a non-combustable
spun polyester fabric which prevents glass fibers from shedding
into the environment. A key design element is the fact that the
IsoTile is suspended on top of the existing acoustic ceiling tile.
Easy to install ASC ships the IsoTile in the form of 2’ x 2’
tiles, 4.25” thick, ready to install. The Tiles rest on top
of existing suspended ceiling tiles. IsoTiles are lightweight, and
go in by lifting the adjacent acoustic tile to access the ceiling
cavity. No glue or adhesive is needed. Partial Tiles and openings
can be cut to fit the ceiling using ordinary construction tools
such as circular saws and hole saws.
How it Works Noise from the floor above is isolated and absorbed by
the top half of the IsoTile. At the same time, noise from the room
below is isolated and absorbed by the bottom half of the IsoTile.
The soundproof rating for IsoTile on top of acoustic ceiling tile
is approximately STC 35.