Industrial Acoustics

For nearly 25 years, ASC has been helping industrial clients mitigate noise in the harsh environments of the factory work place. Often, products are adapted to provide service in unusual environments such as clean rooms, outdoor noise sources and saw mills.

Industrial noise controls are often mandated by OSHA regulations, city, county or state ordinances, or court ordered remedies. ASC has helped clients through the often confusing process, and we provide certified testing and engineering as well as noise control products to put you into compliance.

Industrial Sound Traps
Industrial Sound Traps are cylindrical sound absorbers based on ASC's patented bass trap (ASC-TubeTrap™) technology. This unit is 9" diameter and 36" long. It can be attached at both ends and strung together on cables vertically or horizontally. Sound Traps are used to lower RT-60 in high ceiling situations typically found in warehouses, food courts, factories, mills and restaurants. They can also be used as part of an OSHA compliance program to quiet a noisy workplace. It is covered with fire rated gray felt fabric.

Industrial Sound Panels

The Industrial SoundPanel is an affordable and easy to install fire rated acoustic absorption device that attaches to the wall in high noise environments. This is ideal for use in any factory or industrial environment where tools make high levels of noise. Use these panels as part of an OSHA compliance program or whenever mandated by safety standards.

Industrial Sound Mufflers

Sound Mufflers are essentially large versions of the typical car muffler, and can be as effective in quieting industrial noise. They are installed in-line and designed to maintain proper air flow while reducing noise to tolerable levels. ASC Mufflers are used to quiet noisy dust control systems, and can be a part of your OSHA compliance plan.

IsoTile Panel

This 2' x 2' x 4" Panel is installed over suspended ceiling tiles to absorb and stop sound transmission through the ceiling. This is an easy to install acoustic upgrade for any "T-bar" suspended ceiling tile system, and the product is completely hidden from view. Shared offices sound quieter because plenum noise is absorbed instead of reflected.

Industrial SoundFence
More than a typical sound barrier, which only reflects noise, ASC SoundFence absorbs AND blocks noise. If you have outdoor compressors, transformers or HVAC equipment in close proximity to residential areas, odds are good that you need an ASC SoundFence. There are many types of noise barriers that cost much more than the SoundFence, but these don’t absorb noise.

"X" Baffles
These absorbers hang from the ceiling and are designed to knock down excess RT-60 noise in a typical factory setting. When hung as a group, "X" Baffles can significantly reduce excess Db levels. This baffle system has much better directional absorption compared to flat panel baffles. Use "X" Baffles as part of an OSHA noise compliance program.